December 2018
 Scroll down For this Month
__________
12/31/2018

Repaired Band Saw Blade Welder
___________
12/30/2018

Ubitx Radio Interface Board, assembled.
___________
12/29/2018

Rebuilt Dehydrator with Glow Cones.
____________
12/28/2018

Removed Head from Lathe and cleaned it.
___________
12/27/2018

After Two Days, Got OLED to work with I2C communication.
__________
12/26/2018

Worked on PC Board, Standard Pencil, Not so easy resistors to solder and re-solder.
___________
12/25/2018

Christmas 1951,  I am trying to be good,  then and now, most of the time I have failed.
____________
12/24/2018

Played with new display 2.4 " OLED
____________
12/23/2018

Move Stuff from here to there, over and over.
___________
12/22/2018

Went Shopping
___________
12/21/2018

Trammed the Mill in,  and clean up
__________
12/20/2018

For ever and ever
___________
12/19/2018

Failed All Day
_____________
12/18/2018

I took the "Red Pill"
___________
12/17/2018

Worked on code.
____________
12/16/2018

Persimmons to the dehydrator, more brush, more code
__________
12/15/2018
  
Worked on code for Nextion Display
___________
12/14/2018

More work on brush around trees
___________
12/13/2018

Cleared Brush in between trees
___________
12/12/2018
 
Repaired Spline Plastic Inserts on Enco Milling Machine
__________
12/11/2018

Radio Class
___________
12/10/2018

Work on test with Arduino.
___________
12/09/2018

ReadKeys ();                        
 if (myentry == 0) return;
      oled.println (myentry,3);           // jet id
                        
          temp3=myentry/2;                     //  b=jid/2
             temp4=temp3*temp3;                 //  br=b * b
 temp5=3.1416*temp4;                // A
temp4=(2*G)*temp1;                 // n
    temp3=sqrt(temp4);                   // SPB
  temp6=(temp3*temp5)*12;       // VB
        temp5=(temp6*60)/232;               // GPM
              temp4=((temp5*232)/1728)/60;        // CFPS
             temp6=(((temp4*temp1)/8.8)*.85);     //  HP
       temp1=temp3*60;                    //  svbpm
         temp3=(temp2*3.1415)/12;             //   cw
        temp4=temp1/temp3;                  //RRPM
                                     temp2=(temp1/2)/temp3;               //LRPM                          
 delay(2000);
 oled.clear();
 oled.print (" HORSE  POWER");
oled.println (temp6);

Spent the Day trying to make sense of my own code.

____________
12/08/2018

Robot Club
_____________
12/07/2018

Contemplated "The day that lives in Infamy".
___________
12/06/2018

Worked on mill repair.
____________
12/05/2018

Cut a new PC board for testing
___________
12/04/2018

Radio Class
___________
12/03/2018

Made PC Board
_____________
12/02/2018

Worked on PC Board
____________
12/01/2018

Worked on Schematic